| 
topslit
The range of materials which can be converted comprises
all types of paper,
board and packaging materials. A contact pressure control
for the rewind unit
enables winding of the most delicate materials.
|
Winding type:
- simplex center winding with non driven lay-on
roller
- gap winding
|
Working width:
- 1000 mm / 39.4 in
- 1270 mm / 50 in
- 1650 mm / 63 in
- wider upon request
|
|
Unwind diameter:
- 1250 mm / 49 in
- 1500 mm / 59 in
- larger upon request
|
Rewind diameter:
- 1250 mm / 49 in
- larger based on application
|
|
Mini-slit width:
|
Maximum running speed:
|
 The
GOEBEL topslit is the latest slitter rewinder developed
by GOEBEL. This machine is designed for authentic centre
drive and can be equipped with a pull roller group in addition
to the rewind drive for handling extremely critical materials.
The GOEBEL topslit can be supplied either with a removable
rewind shaft or with mandrel and integrated finished roll
unloading device. In the latter case, the mandrel remains
inside the slitter while the finished rolls are removed
directly from the machine. The finished folls can be changed
quickly without the necessity of manual rewind shaft handling.
- Goebel wrapped shear slitting system with bottom and
top cutter shafts or bottom cutter shaft and individual
top knives. Tangential shear cut knives are also available.
- Integrated finished roll removal system
- Sensitive electronic control of contact pressure and
rewind tension
- A.C. drive technology
- Short web run after slitting for optimal roll seperation
and edge quality
- Controls system with modern PLC and bus technology
- Control system with touch panel or PC with Windows NT
- Modern operating concept with display and storage of
winding parameters
- Tele-service
- Optional pull roll group
- Shaftless unwind
|
